Category: JCN Newswire

Kawasaki and Yokohama, JAPAN, Feb 12, 2025 - (JCN Newswire via SeaPRwire.com) - Fujitsu Limited and Yokohama National University today announced the achievement of the world’s first real-time prediction of multiple typhoon-associated tornadoes using advanced supercomputing technology, significantly improving disaster preparedness.The new technology utilizes optimized large-scale parallel processing coupled with the enhanced Cloud Resolving Storm Simulator (CReSS), a weather simulator developed by Professor Kazuhisa Tsuboki on Fujitsu’s Fugaku supercomputer. This allows for a single, high-resolution simulations encompassing both large-scale typhoons and smaller-scale tornadoes, resulting in accurate, real-time predictions.Previously, during simulations of Typhoon No. 10’s tornadoes, which hit Japan’s Kyushu area in August 2024, it took more than 11 hours to predict whether or not tornadoes would occur, making the predictions not practicably applicable. This technology was able to drastically reduce prediction time to 80 minutes, allowing the two partners to predict the occurrence of a tornado four hours in advance. This prediction calculation used only 5% of Fugaku's computational resources, indicating the potential for even larger-scale and faster predictions in the future.The two partners will release the enhanced CReSS to the research community within fiscal year 2024, significantly improving the prediction of severe weather events and enhancing disaster mitigation efforts.BackgroundApproximately 20% of tornadoes in Japan occur alongside typhoons. In response to increasing tornado damage, Japan began issuing tornado warnings in 2008. However, compared to weather phenomena like precipitation, which can be predicted with high accuracy, tornadoes are difficult to predict due to their small scale and short duration. Tornado warnings currently have a validity period of about one hour, and there is a demand for longer warning periods.Fujitsu and Yokohama National University initiated a joint research project in November 2022, aiming to address societal challenges related to increasingly severe typhoons exacerbated by global warming. This collaboration, conducted under the Fujitsu Small Research Lab's "Fujitsu - Yokohama National University Typhoon Science and Technology Research Center Collaborative Research Laboratory," focuses on understanding typhoon formation mechanisms and accelerating and improving the accuracy of typhoon prediction simulations.Accomplishments of the joint research project1. Applied technologyThe CReSS weather simulator, based on a high-precision weather simulations spanning cloud scales (horizontal 50m-2,000m) to mesoscales (horizontal 2km-2,000km), accurately simulates the formation and development of supercell thunderstorms that generate tornadoes. However, CReSS's original design was not suitable for the large-scale parallel processing (thousands of nodes) required for typhoon-associated tornado prediction, resulting in excessively long parallel computation times and rendering it unsuitable for real-time prediction.To address this, a lightweight version of CReSS was developed, significantly reducing computational demands while maintaining the necessary prediction accuracy. Furthermore, Fujitsu's large-scale parallel processing technology was employed, optimizing simulation processing mapping for Fugaku's server network structure and implementing overlapped execution of computation and file output. This significantly reduced simulation time on Fugaku, enabling substantially faster prediction results than previously possible.2. Application resultsPrediction experiments were conducted using CReSS on 8,192 nodes of Fugaku for Typhoon No. 10, which caused tornado damage in Kyushu, Japan, in August 2024. Utilizing 3D spatial data including temperature, pressure, humidity, wind direction, and speed, the simulation successfully reproduced multiple tornadoes that occurred along the eastern coast of Kyushu. Figure 1 shows the simulation results for the entire typhoon, while Figure 2 visualizes the wind and cloud movement in a 20km x 20km area on the eastern coast of Kyushu, clearly showing multiple tornado formations.*YouTube video:Fujitsu and Yokohama National University achieve world’s first real-time prediction of tornadoes associated with typhoons using supercomputer FugakuSeishi Okamoto, EVP, Head of Fujitsu Research, Fujitsu Limited, comments:"We're delighted to share the significant results from our collaborative research with Yokohama National University, a project spanning over two years. This success will further propel the integration of our expertise and technologies. By advancing research in typhoon development prediction and prediction simulation, we aim to help mitigate weather-related disasters and lessen their impact, contributing to solutions for global environment, one of Fujitsu's key materiality topics.Professor Hironori Fudeyasu, Director, TRC, Institute of Multidisciplinary Sciences, Yokohama National University, comments:Fujitsu - Yokohama National University Typhoon Science and Technology Research Center Collaborative Research Laboratory's research represents a major advancement in predicting typhoon-associated tornadoes, a previously challenging meteorological phenomenon. The supercomputer Fugaku and high-resolution modeling enabled high-precision simulations across scales, leading to real-time predictions crucial for improving early warning systems and mitigating the impact of these devastating events. This breakthrough is expected to significantly contribute to disaster risk reduction while minimizing environmental consequences.Future PlansTo accelerate research on meteorological disasters, including typhoons, Fujitsu and Yokohama National University plan to publicly release the large-scale parallel version of CReSS within this fiscal year. Furthermore, based on these achievements, both organizations will work to further improve speed and prediction accuracy, leveraging AI technology. Through these efforts, we will contribute to solving global environmental issues, one of Fujitsu's key materiality topics.Remarks:This research was conducted with computing resources provided by the Fugaku supercomputer through the Fugaku Industrial Trial Project (Project Number: hp240255).About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers in over 100 countries, our 124,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: Computing, Networks, AI, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.7 trillion yen (US$26 billion) for the fiscal year ended March 31, 2024 and remains the top digital services company in Japan by market share. Find out more: www.fujitsu.com.About Yokohama National UniversityYNU was established in 1949 as a national university by integrating 4 old-education-system schools and has 5 colleges and 6 graduate schools at its campus in Tokiwadai, Hodogaya-ku, Yokohama. YNU declares that it will make every effort to establish a strong footing in academic research and education by upholding 5 fundamental principles:'Be Active','Be Innovative','Be Open' ,'Be Global' and 'Be Diversity' cultivated as the spirit of YNU throughout its history. URL : https://www.ynu.ac.jp/english/special/message/.Press ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiriesYokohama National UniversityTRC, Institute of Multidisciplinary Sciences, Yokohama National Universitytrc-office@ynu.ac.jp Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 10, 2025 - (JCN Newswire via SeaPRwire.com) - NEC Corporation (NEC; TSE: 6701) has developed a solution that enables the modernization of tasks, including planning, design and construction work, when telecommunications carriers install network infrastructure such as base stations. The introduction of this solution makes it possible to reduce the time required to build mobile infrastructure, from RAN to core, by approximately 60% compared to conventional methods.In order to accommodate the spread of 5G network virtualization technology (v-RAN, O-RAN, NFV), network infrastructure construction requires modernization to new processes based on cloud-native technology. It is expected that synergies between virtualization and modernization will further improve the level of automation in network infrastructure construction work. This solution responds to such needs, and improves the efficiency, quality and productivity of the virtualized mobile infrastructure construction process.Solution features:1. Provision of professional servicesBased on the wealth of knowledge NEC has gained from building virtualization platforms, the solution analyzes the business processes required when building network infrastructure, from site design to construction, testing, maintenance, operation, and quality management. This helps to support the identification of issues, the formulation of a vision, and the creation of a modernization implementation plan. The solution provides consultation on identifying issues in business processes, making improvements, providing implementation support, measuring the effects, and streamlining the business processes of telecommunications carriers to improve quality and productivity.2. A package of technologies supporting mobile network modernizationThe solution provides a package of technologies that are necessary for automating operations for each process of construction work. This allows telecommunications carriers to focus on implementing modernization measures. The solution is compatible with cloud-native technologies, and is composed of a microservice architecture that develops and links applications as small, independent groups of services. This makes it possible to support open, multi-vendor equipment.3. Real-time confirmation of operational data and acceleration of the feedback cycleNetwork operations staff are able to confirm operational data for all base stations in real time. This contributes to improving communication quality by speeding up the feedback cycle for base station status, as well as increasing operational efficiency.NEC provides the "Network and Cloud-Native Orchestrator" for telecommunications carriers. This supports digital transformation (DX) (modernization, hyper-automation, and automation/autonomy) in network operations, and enables total operational efficiency and optimal operation management (orchestration) from network virtualization/containerization, cloud design/construction to maintenance. Through this solution, NEC optimizes the entire lifecycle of network infrastructure, from construction to operation. This enables telecommunications carriers to quickly expand their service areas and contributes to their profitability.NEC offers end-to-end DX services, from strategy and concept consulting to implementation-focused offerings, based on the three pillars of business models, technology, and organization/talent. Additionally, in its shift from a traditional systems integrator to a "Value Driver," NEC restructured its value creation model under the name "NEC BluStellar" (*), which leverages NEC's cutting-edge technologies, developed and refined through years of experience and proven cross-industry expertise, aiming to transform business models, address social challenges, resolve management issues faced by customers, and lead them into a brighter future.(*)NEC BluStellar is a value creation model that leverages NEC’s cutting-edge technologies, developed and refined through years of experience and proven cross-industry expertise. It aims to transform business models, address social challenges, resolve management issues faced by customers, and lead them into a brighter future.ShareAbout NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 10, 2025 - (JCN Newswire via SeaPRwire.com) - Olympus Corporation (Olympus), a global MedTech company committed to making people’s lives healthier, safer and more fulfilling, today announced it has been recognized by CDP1, an international environmental non-profit organization, as an “A List” company for fiscal year 2024. The A List rating is awarded to companies that demonstrate excellence in setting climate change-related targets and initiatives.CDP evaluates major corporations and institutions around the world based on their responses to questions on climate change measures, water resource management, and environmental issues. In this year's assessment, approximately 24,800 companies participated globally, including more than 2,100 Japanese companies.As part of its Environmental, Social, and Governance (ESG) strategy, Olympus has designated “Carbon Neutral Society and Circular Economy” as a focal area. To contribute to the realization of a decarbonized future, Olympus established a target in May 2023 to achieve net-zero greenhouse gas emissions across its supply chain by 2040. In November 2023, Olympus received a net-zero2 certification from the Science Based Targets initiative (SBTi)3, reinforcing its commitment to sustainability.In addition, Olympus is accelerating its efforts to reduce greenhouse gas emissions by improving manufacturing processes, promoting energy-saving measures, and phasing power consumption at its facilities to renewable energy sources. Recognizing the importance of reducing the environmental impact across its entire supply chain, Olympus is working continuously to develop environmentally friendly products, enhance logistics efficiency, and set emission reduction targets in collaboration with suppliers. These initiatives support both the company’s sustainability goals and the broader global effort toward decarbonization.For further details on Olympus’ sustainability initiatives, please visit the Sustainability page.Comment from Yasuo Takeuchi, Olympus Director, Representative Executive Officer, and Executive Chairman and ESG Officer“At Olympus, ESG principles are embedded in our corporate strategy as we work toward the realization of Our Purpose of making people's lives healthier, safer and more fulfilling. Our recognition on CDP’s A list reflects our commitment to climate action and transparent environmental disclosure. We believe that contributing to the sustainable development and progress of the globe and society based on our founding spirit, by putting Our Purpose into practice, will allow Olympus itself to achieve sustainable growth and value creation.”1: CDP is a global non-profit that runs the world’s environmental disclosure system for companies, cities, states and regions. Founded in 2000, CDP pioneered using capital markets and corporate procurement to motivate companies to disclose their environmental impacts, and to reduce greenhouse gas emissions, safeguard water resources and protect forests. Fully TCFD aligned, CDP holds the largest environmental database in the world, and CDP scores are widely used to drive investment and procurement decisions towards a zero carbon, sustainable and resilient economy.2: Net zero refers to reducing greenhouse gas emissions (Scopes 1, 2, and 3*) by at least 90% in line with the latest climate science (1.5°C scenario). Remaining emissions (less than 10%) must be offset using equivalent credits derived from carbon sequestration and removal (such as afforestation and CO2 capture and storage) to achieve balance.*Scope 1: Direct greenhouse gas emissions by combustion of fuels in our sites.Scope 2: Indirect greenhouse gas emissions from our sites use of electricity, heat or steam supplied by other companies.Scope 3: Other, indirect emissions of greenhouse gas emissions (excluding Scope 1 and 2).3: SBTi is an international initiative jointly established by the World Wildlife Fund (WWF), CDP, the World Resources Institute (WRI), and the UN Global Compact. The initiative encourages companies to set science-based greenhouse gas reduction targets that align with the goal of limiting global temperature rise to 1.5 degrees Celsius above pre-industrial levels.About OlympusAt Olympus, we are committed to Our Purpose of making people’s lives healthier, safer and more fulfilling. As a global medical technology company, we partner with healthcare professionals to provide innovative solutions and services for early detection, diagnosis and minimally invasive treatment, aiming to improve patient outcomes by elevating the standard of care in targeted disease states. For more than 100 years, Olympus has pursued a goal of contributing to society by producing products designed with the purpose of delivering optimal outcomes for its customers around the world. For more information, visit https://www.olympus-global.com/ and follow our global X account: @Olympus_Corp.Media contact:Mail: Global-Public_Relations@olympus.comOlympus Corp [TYO: 7733] [ADR: OLYMY] [STU: OLY1] [FRA: OLYS] https://www.olympus-global.com Copyright 2025 JCN Newswire via SeaPRwire.com.

-- New "EC-8" Model to Be Marketed this Spring, with Expanded Feature to Control up to 8 Centrifugal Chillers --- Optimal control of centrifugal chillers and peripheral equipment, achieving further energy savings across the whole heat source facilities- With added features for multiple pump system and communication protocols, the new model can be more widely installed in overseasTOKYO, Feb 6, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Heavy Industries Thermal Systems, Ltd. (MHI Thermal Systems), a part of Mitsubishi Heavy Industries (MHI) Group, announces the launch of a new model of its "Ene-Conductor" Heat Source Control System for integrated control of centrifugal chillers and peripheral equipment such as chilled water pumps, cooling water pumps, and cooling towers. The new EC-8 model, to be added to the lineup this spring, allows for control of up to 8 centrifugal chiller units. With these features, the new model can be more widely used and installed in overseas large-scale facilities, as well as enhancing the energy conservation for the whole facilities.Ene-Conductor incorporates the operational and control knowledges and experiences as a centrifugal chiller manufacturer, offering a packaged solution with higher energy-saving control functions, such as controlling the number of centrifugal chillers, controlling the variable flow rate of chilled water and cooling water. With these packaged features, the new model automatically determines the optimal operation of the entire air conditioning system, reducing power consumption by up to approximately 26%.(Note1) In addition, because the repeated system design in each project and workload for installation can be reduced, the system can be installed easily. Furthermore, Ene-Conductor can be added to existing facilities, therefore, even without renewing and updating facilities, it is possible to install the Ene-Conductor and realize further energy savings.The EC-8 model supports both the individual pump system(Note2) and the multiple pump system(Note3) widely used in Southeast Asia and the Middle East. For the communication protocol for exchanging information between machines and sensors, the BACnet® protocol has been added in addition to Modbus®. This makes it possible to real-time data exchange with a higher-level supervisory control device, improving responsiveness. In addition, there is less wirings (signal cables), therefore, construction management is also easier. These additional features allow the system to be installed in a broader range of facilities especially in overseas.MHI Group has made a declaration to achieve carbon neutrality by 2040, and is working to reduce CO2emissions from its own plants and other production-related facilities, as well as reduce the CO2emissions at customer facilities that use MHI Group products. As a part of MHI Group, MHI Thermal Systems supplies a large number of centrifugal chillers for general air conditioning, factory air conditioning, and district heating and cooling, boasting the top market share in Japan in this field. Going forward, MHI Thermal Systems will continue to respond to customer needs, and by delivering centrifugal chillers and thermal solution products with a low environmental load, contribute to the realization of a carbon neutral world.(1) Comparison between three standalone units of MHI Thermal Systems' JHT-Y75I centrifugal chiller (700 refrigeration tons), and the same units controlled by Ene-Conductor.(2) A system in which primary cold and hot water pumps or cooling water pumps are connected by piping individually to a centrifugal chiller or other heat source, supplying cold and hot water or cooling water.(3) A system in which a single or several primary cold and hot water pumps or cooling water pumps are branched by a common pipe to several centrifugal chillers or other heat source, with cold and hot water or cooling water supplied as necessary.About MHI GroupMitsubishi Heavy Industries (MHI) Group is one of the world’s leading industrial groups, spanning energy, smart infrastructure, industrial machinery, aerospace and defense. MHI Group combines cutting-edge technology with deep experience to deliver innovative, integrated solutions that help to realize a carbon neutral world, improve the quality of life and ensure a safer world. For more information, please visit www.mhi.com or follow our insights and stories on spectra.mhi.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 6, 2025 - (JCN Newswire via SeaPRwire.com) - Hitachi, Ltd. (TSE: 6501, "Hitachi") today announced the establishment of the fourth fund of the corporate venture capital(hereinafter referred to as "CVC") fund"HV Fund" with a purpose to identify startups with the potential to create or disruptlarge attractive markets, anticipate the next technological and social turning points, and generate future growth opportunities. The fourth fund will have a size of 400 million USD, which is the largest CVC fund managed by Hitachi to date. The fund will make strategic investments in startups with cutting-edge, digital technologies such as data centers, distributed energysystems, future of work and industrial AI, as well as startups in new frontiers including bio, quantum, nuclear fusion, lifescience, space and adjacent technologies. With the establishment of the fourth fund, Hitachi's investment in CVC will reach1 billion USD (AUM(1)), a world-class investment scale which will further accelerate open innovation and contribute to theinnovation ecosystem of startups globally.Under the leadership of Toshiaki Tokunaga, who will be appointed as Representative Executive Officer, President & CEOin April, Hitachi aims to realize "True One Hitachi" with digital at its core and accelerate sustainable growth of Social Innovation Business. In the next Mid-term Management Plan, which is currently being formulated, Hitachi will enhance not only existing businesses but also efforts to explore new technologies and capture future growth opportunities. Theestablishment of the fourth fund is intended to add on and further expand Hitachi’s investment in innovative startups toidentify the next technology turning points and business model changes that will lead to business creation. In order topromote business creation under the new Mid-term Management Plan, this corporate venturing initiative will collaborate with“Strategic SIB(2) Business Unit”, which will be launched in April to mobilize company-wide resources and accelerate innovation.Hitachi established Hitachi Ventures ("HV") in June 2019, and now managed 3 CVC funds. HV now has a startup portfolio of38 companies, including newly born Unicorns that meet the criteria of "more than 1 billion USD in valuation" and "within 10years of establishment". In addition, about half of this portfolio have already begun collaborating with Hitachi’s business units and group companies and are making progress. These startups include: Makersite, the leader in product lifecycle intelligence software, which uses AI and data analysis to accelerate and enhance sustainable product and supply chain decision-making; Captura, which offers advanced engineered carbon dioxide removal technology; and Archetype AI,whose Physical AI foundation model, Newton, enables developers to rapidly build solutions with their real-world sensordata. These collaborations are contributing to accelerated implementation of cutting-edge technologies and business models.By leveraging these achievements under a world-class CVC investment scale, combined with the development of cutting-edge technologies through own R&D, Hitachi will anticipate the latest transitions in technology and society, linking them tobusiness creation, thus achieving sustainable growth.(1) AUM: Assets Under Management(2) SIB: Social Innovation BusinessKeiji Kojima, President and CEO of Hitachi, Ltd. said:Hitachi's efforts in CVC, which began in 2019 with 150 million USD, have expanded to 1 billion USD in 5 years, driven in part by the disruptive innovation brought about by Generative AI. With technology trends shifting at an unprecedentedspeed, it is important to identify the next global change point while leveraging the external ecosystem in addition to developing cutting-edge technologies through R&D, for further growth of the Social Innovation Business. We hope that the establishment of the fourth fund will accelerate our quest for new growth opportunities.Toshiaki Tokunaga, Representative Executive Officer and Executive Vice President, Hitachi, Ltd. (To beappointed as Representative Executive Officer, President & CEO on April 1, 2025) said:Under the next Mid-term Management Plan currently being formulated, Hitachi will accelerate its progress toward becominga global leader in Social Innovation Business by achieving "True One Hitachi" with digital at its core. Against this backdrop,strengthening our ability to anticipate global change and adding this new CVC fund to search for the next technologicaltrend beyond Gen AI are significant steps toward achieving sustainable growth. Through our CVC, we will continue to embody the "pioneering spirit" inherited from our founder, Namihei Odaira, and create new growth opportunities jointly withstartups around the world.Stefan Gabriel, CEO & Managing Director, Hitachi Ventures said:We are very grateful for the trust and support from Hitachi’s Executives committing a fourth Hitachi Ventures fund. Whiletopping up our AUM to 1 billion USD, Hitachi Ventures will be able to keep the speed of venture investing in futureUnicorns of fast-changing growth markets in upcoming regions that create strategic and technical relevance for Hitachi’sbusinesses. With our minority investments we help to combine the agility, entrepreneurial spirit and speed of startups withthe global industry reach, trusted expertise and financial strength of Hitachi. This will greatly accelerate the transition of Hitachiand its customers in their transformation journey and help build and grow businesses, collaborate and innovate withselected Unicorns of tomorrow.Overview of the Fourth FundNameHV Fund IVDate ofEstablishmentApril 1, 2025 (scheduled)Advisory CompanyHitachi Ventures GmbHInvestorHitachi, Ltd.Fund Size400 million USDInvestment TargetInnovative startup in cutting-edge, digital technology and new frontiersAbout Hitachi Ventures GmbHDate of EstablishmentJune 1, 2019LocationGermany: Munich (headquarter) USA: Palo Alto, BostonRepresentativeCEO and Managing Director, Stefan GabrielHitachi Ventures is the corporate venture capital arm of Hitachi Ltd. With 1 billion USD assets under management, we focus oninvesting in early-stage and growth-stage technology companies with strategic relevance to Hitachi. With a global networkand extensive experience across various industries, Hitachi Ventures supports innovative startups in their journey todisrupt markets and transform industries. The firm’s investment areas span from environmental tech & circularity, energy, mobility, AI & digital technologies, to industrial automation and life sciences. For more information on Hitachi Ventures, please visit the company's website at https://www.hitachi- ventures.comAbout Hitachi, Ltd.Hitachi is promoting the Social Innovation Business, which uses data and technology to realize a sustainable society. Thethree business sectors are Digital Systems & Services, which supports DX for customers; Green Energy & Mobility, whichcontributes to the realization of a decarbonized society through energy and rail; and Connective Industries, which providessolutions by digitally connecting products in a wide range of industries. Under the business structure of the three sectors, weprovide solutions to our customers and society through Lumada solutions that utilize IT, OT (control and operation technology), and products. Driven by Digital, Green, and Innovation, we aim to grow through collaborative creation with ourcustomers. 3 Sector sales revenue for fiscal year 2023 (ending March 31, 2024) is 8,564.3 billion yen, and as of March 31, 2024, we have 573 consolidated subsidiaries and approximately 270,000 employees worldwide. For more information, please visit Hitachi's website at https://www.hitachi.co.jp/.Contact for InquiriesCorporate Venturing Hitachi, Ltd.Contact form: https://tinyurl.com/3zbyntdh Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 7, 2025 - (JCN Newswire via SeaPRwire.com) - TANAKA PRECIOUS METAL GROUP Co., Ltd. (Head Office: Chuo-ku, Tokyo; Group CEO: Koichiro Tanaka) will provide and donate gold, silver, and bronze medals to the top three men and women finishers of the marathon and wheelchair marathon events at the Tokyo Marathon 2025. The Tokyo Marathon 2025 is organized by the Tokyo Marathon Foundation and will be held on March 2, 2025.Design Representing All the Participants in the Event with Woven LinesThe medals were designed based on the concept of the Tokyo Marathon: The Day We Unite. On the front of the medal, the logo type is placed horizontally above the event logo pattern, which represents “runners, supporters, and cheerers,” to represent the many people who gather and support this event.On the back side of the medal, the name of the event, Tokyo Marathon 2025, is written in Braille, and the word “FINISHER” and the date of the event are engraved, along with TANAKA’s logo. The medal’s ribbon design is a continuation of the 2016 design and is based on the event logo, which resembles a tapestry of lines woven together to represent all the runners, volunteers, and spectators.About the Tokyo Marathon 2025The Tokyo Marathon 2025 is the 18th edition of one of the largest public participation marathons in Japan. As it will celebrate its 20th anniversary in 2027, the event strives to be even more exciting for all participants, based on three pillars: “The safest and most secure race in the world,” “The most exciting race in the world,” and “The warmest and most friendly race in the world.” This year, the event has adopted “SPARK!” as the keyword to represent the enthusiasm of everyone, the way each person’s motivation ignites their heart, and how their emotions will explode.TANAKA has produced the winner medals and finisher medals for every Tokyo Marathon since the first held in 2007, with this year marking the 18th year. The Tokyo Marathon joined the World Marathon Majors (currently the Abbott World Marathon Majors) in 2013, attracting global attention as one of the world’s seven premier marathons. Other than the Tokyo Marathon, TANAKA has also produced medals for the winners of the Tokyo Legacy Half Marathon, supported the promotion of para-sports as an official partner of the Japanese Para Sports Association (JPSA), and produced and sold official commemorative medals for the 1964 Tokyo Olympic Games. TANAKA will continue to produce medals made of precious metals and support the promotion of sports with the aim of contributing to the realization of a prosperous society.Overview of the Tokyo Marathon 2025 MedalsWeight, size and materialGold Medal: approx. 100g 65mm in diameter and approx. 2.8mm: pure silver with gold platingSilver Medal: approx. 100g 65mm in diameter and approx. 2.8mm: pure silverBronze Medal: approx. 85g 65mm in diameter and approx. 2.8mm: pure copper platingTokyo Marathon 2025 MedalsExhibition Schedule at GINZA TANAKA (Ginza Main Branch)- Exhibition Period: February 8 to 27, 2025- Exhibition Venue: 1F, Ginza Main Branch, GINZA TANAKA*The exhibition is open to everyone to view.*For those who wish to cover or photograph the medals or bring them into a studio during the exhibition period, please contact the Press Desk (03-6260-4854).Race Information of the Tokyo Marathon 2025OrganizerTokyo Marathon FoundationCo-organizersJAAF (Japan Association of Athletics Federations); Tokyo Metropolitan Government;The Yomiuri Shimbun; Nippon Television Network Corporation;Fuji Television Network, Inc.; Sankei Shimbun Co., Ltd.; The Tokyo Shimbun.Managing OrganizationTokyo Athletics AssociationOperation SupporterTokyo Sports Association for the Disabled; Kanto Para Athletics.Supporting OrganizationsJAPAN SPORTS AGENCY; Ministry of Land, Infrastructure, Transport and Tourism;Japan Tourism Agency; Metropolitan Tokyo Mayors' Council; Japan Sports Association;Japanese Olympic Committee; Japanese Para Sports Association;Japan Para Athletics; Nippon Keidanren (Japan Business Federation);KEIZAI DOYUKAI (Japan Association of Corporate Executives);The Tokyo Chamber of Commerce and Industry; Tokyo Medical Association;Tokyo Disaster Prevention & Emergency Medical Service Association;Tokyo Private Ambulance Call Center Registered Companies Liaison Council;TOKYO NURSING ASSOCIATION; Tokyo Convention & Visitors Bureau;Tokyo Federation of Neighborhood Associations;Tokyo Federation of Shopping Center Promotion Associations & Tokyo Federation of Shopping Centers;Tokyo Sports Association; Community Sport Leaders Tokyo;Metropolitan Expressway Co., Ltd; The Hochi Shimbun; Radio Nippon Co., Ltd.;Sankei Sports; Nippon Broadcasting System, Inc.;The Tokyo Chunichi Sports.Presenting PartnerTokyo Metro Co., Ltd.Official PartnersSTARTS CORPORATION INC.; Mastercard; ASICS Japan Corp.;Otsuka Pharmaceutical Co., Ltd.; KINTETSU INTERNATIONAL;SEIKO GROUP CORPORATION; The Dai-ichi Life Insurance Company, Limited; McDonald's Company (Japan), Ltd.; Mizuho Bank, Ltd.;Kokumin Kyosai co-op (National Federation of Workers and Consumers Kyosai Cooperatives);Hisamitsu Pharmaceutical Co., Inc.; Kao Corporation; BATHCLIN CORPORATION; Porsche Japan K.K.; NIHON KOHDEN CORPORATION; KOYOU RENTIA Co., Ltd.; Fanplus, Inc.; Shimizu Octo, Inc.; SAGAWA EXPRESS CO., LTD.;TANAKA PRECIOUS METAL GROUP Co., Ltd.; Rokko Butter, Co., Ltd.;Hibino Corporation; Photocreate Co., Ltd;DateSunday, March 2, 2025*The race information is current as of the time this press release was published. For the latest information, please check the Tokyo Marathon official website.About TANAKASince its foundation in 1885, TANAKA has built a portfolio of products to support a diversified range of business uses focused on precious metals. TANAKA is a leader in Japan regarding the volume of precious metals it handles. Over many years, TANAKA has manufactured and sold precious metal products for industry and provided precious metals in such forms as jewelry and assets. As precious metals specialists, all Group companies in Japan and worldwide collaborate on manufacturing, sales, and technology development to offer a full range of products and services. With 5,355 employees, the group’s consolidated net sales for the fiscal year ending December, 2023, was 611.1 billion yen.TANAKA PRECIOUS METAL GROUP Co., Ltd.Websitehttps://www.tanaka.co.jp/english/Press inquiriesTANAKA PRECIOUS METAL GROUP Co., Ltd.https://www.tanaka.co.jp/support/req/other_contact_e/index.htmlPress Release: https://www.acnnewswire.com/docs/files/20250206.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

- Low-pressure Type Liquefied CO2 carriers are under development in pursuit of transportation from domestic emission sites to base site for overseas shipping, or domestic storage sites- Preparation is accelerating toward early market launch of LCO2 carriers, including applications in future CCS projects underway by the Japanese GovernmentTOKYO, Feb 5, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Shipbuilding Co., Ltd., a part of Mitsubishi Heavy Industries (MHI) Group, and Nippon Gas Line Co., Ltd. (NGL) have jointly acquired Approval in Principle (AiP)(Note1) from Nippon Kaiji Kyokai (ClassNK) for a low-pressure type liquefied CO2 (LCO2) carrier to serve in coastal transportation.Demand for LCO2 carriers is expected to grow in tandem with CCS (carbon dioxide capture and storage) projects involving marine transport of CO2 captured in Japan to storage sites. Mitsubishi Shipbuilding and NGL received AiP certification from ClassNK following a jointly conducted concept study on low-pressure type coastal LCO2 carriers, assuming their use for transport from small-scale CO2 capture sites mainly in the Seto Inland Sea area to base site toward overseas storage sites. The concept study has been conducted in conjunction with the FY2024 "Japanese Advanced CCS Projects" carried out by the Japan Organization for Metals and Energy Security (JOGMEC). The LCO2 carrier receiving the newly acquired AiP is a versatile small-sized ship designed for use in domestic sea.MHI Group is currently pursuing strategic measures to strengthen its business for the energy transition. In conjunction with this initiative, Mitsubishi Shipbuilding is making efforts to contribute to the advancement of the maritime industries in Japan and around the world by utilizing its shipbuilding-based marine engineering technologies in addition to the conventional shipbuilding. Mitsubishi Shipbuilding will actively promote the development of LCO2 carriers and the establishment of CCS value chains through collaboration with various domestic/overseas companies.NGL is a participant of the "CCS Engineering Design Work in Sarawak, Malaysia" project(Note3), as the Japanese Advances CCS Projects in FY2024. The project calls for the launch of a sea transport scheme using highly versatile small-sized LCO2 carriers to consolidate CO2 collected in Japan for overseas shipping. The project aims to enhance business efficiency through shipment scale expansion. The LCO2 carrier newly acquiring AiP certification is expected to serve as a powerful means of sea transport supporting this scheme.(1) Approval in Principle (AiP) indicates that the certification body has reviewed the basic design and approved it as satisfying technical requirements and safety criteria. The assessment was conducted in accordance with the ICG Code(Note2) and ClassNK classification rules applicable to vessels transporting liquefied gas in bulk.(2) The IGC Code (International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk) is an international regulation stipulating conditions to ensure the safety of vessels that transport liquefied gases (LCO2, LNG, etc.) in bulk.(3) For further information, see: https://tinyurl.com/9w6wkpdr About MHI GroupMitsubishi Heavy Industries (MHI) Group is one of the world’s leading industrial groups, spanning energy, smart infrastructure, industrial machinery, aerospace and defense. MHI Group combines cutting-edge technology with deep experience to deliver innovative, integrated solutions that help to realize a carbon neutral world, improve the quality of life and ensure a safer world. For more information, please visit www.mhi.com or follow our insights and stories on spectra.mhi.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

Toyota City, Japan, Feb 5, 2025 - (JCN Newswire via SeaPRwire.com) - Toyota Battery Manufacturing North Carolina (TBMNC), Toyota's first in-house battery manufacturing plant outside Japan, is ready to begin production and will start shipping batteries for North American electrified vehicles in April.The nearly $14 billion battery facility, Toyota's 11th manufacturing plant in the United States, will produce batteries for hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs) and battery electric vehicles (BEVs) supported by 5,000 jobs.The new battery plant is part of Toyota's "best-in-town" approach―investing and producing locally, contributing to the local community and offering products tailored to local needs through a multi-pathway strategy. To date, Toyota's total U.S. investment stands at $49 billion, which supports more than 280,000 jobs in the industry. As a member of America's business community, Toyota will continue to contribute to the region through job creation and investment.TBMNC OverviewCompany nameToyota Battery Manufacturing North CarolinaEstablishedNovember 2021Plant PresidentSean SuggsEquityToyota Motor North America, Inc. (TMNA) 90%, Toyota Tsusho 10%No. of employeesApprox. 5,000 (planned)BusinessManufacture of automotive batteriesAbout Toyota Toyota strives to be a strong corporate citizen, engaging with and earning the trust of its stakeholders, and to contribute to the creation of a prosperous society through all its business operations.Our corporate principles form the basis of our initiatives, reflect values that enable action, and drive our mindset.For the latest Toyota-related news and information:https://tinyurl.com/ToyotaPressReleasenewsroom@global.toyota Copyright 2025 JCN Newswire via SeaPRwire.com.

Toyota City, Japan, Feb 5, 2025 - (JCN Newswire via SeaPRwire.com) - Toyota Motor Corporation (Toyota) announced today that it will sign a comprehensive partnership agreement with the Shanghai municipal government in China regarding carbon neutrality. In addition, Toyota has decided to establish a new wholly-owned company in Jinshan District in southwest Shanghai to develop and produce BEVs and batteries.Under this partnership with the Shanghai municipal government, Toyota hopes to contribute to the Chinese government's goal of achieving carbon neutrality by 2060 in fields such as hydrogen energy, automated driving technology, and battery recycling and reuse. To drive the initiative forward, Toyota will establish a new company based on the belief that quicker supply of products that meet customers' needs is important in China where there is a high demand for new energy vehicles.The newly formed company will develop a new BEV under the Lexus brand, with production scheduled to begin from 2027 onwards. The initial production capacity will be around 100,000 units per year, and approximately 1,000 new jobs are planned for the start-up phase.Toyota has been working with partners such as China FAW Group Co., Ltd. and Guangzhou Automobile Group Co., Ltd. to bring smiles to customers in China. Going forward, Toyota will continue working together with all its partners to be a "best-in-town" company to achieve its goal of "producing happiness for all."About Toyota Toyota strives to be a strong corporate citizen, engaging with and earning the trust of its stakeholders, and to contribute to the creation of a prosperous society through all its business operations.Our corporate principles form the basis of our initiatives, reflect values that enable action, and drive our mindset.For the latest Toyota-related news and information:https://tinyurl.com/ToyotaPressReleasenewsroom@global.toyota Copyright 2025 JCN Newswire via SeaPRwire.com.

KAWASAKI, Japan, Feb 5, 2025 - (JCN Newswire via SeaPRwire.com) - Fujitsu Limited today announces its participation in Mobile World Congress Barcelona 2025 (MWC25). Under the theme “Boundless Potential,” Fujitsu will unveil its latest advancements in network technologies and enterprise solutions, and highlight how AI is revolutionizing networks and driving business transformation.At booth 2G60 (Hall 2), Fujitsu will offer visitors interactive demonstrations of AI-enhanced network infrastructure, including solutions for optimizing 5G and optical networks, showcasing improved resource allocation and reduced latency. Attendees will see innovative AI applications in action, such as AI agents improving efficiency in manufacturing and IT operations and an ocean digital twin utilizing AI and autonomous underwater vehicles (AUVs) for environmental monitoring and predictive maintenance of marine infrastructure. Fujitsu will also highlight the high-performance, energy-efficient processor FUJITSU-MONAKA (1), showcasing its capabilities in accelerating AI workloads and reducing power consumption.Customer use cases and demonstrations will illustrate how Fujitsu's solutions are already contributing to sustainability transformation (SX) by optimizing supply chains, enhancing resilience, and driving operational efficiency across various sectors.For more information, or to arrange an interview or tour of the Fujitsu booth, please contact us below or visit MWC Barcelona 2025 Fujitsu Website.Exhibition highlights1. Connectivity zone - solutions to enhance networks and AINetwork for AI: Network infrastructure solutions that ensure high reliability, security, and reduced power consumption for stable operation of sophisticated AI services, including:- The AI-RAN solution which optimizes resource allocation on GPU servers, integrating RAN functions and AI applications for efficient resource management.- Demonstration of the O-RAN compliant 5G Radio Unit (RU) solution.- Live demo of the 1FINITY series optical transmission solution showcasing zero-latency switching.AI for Network: Interactive demonstrations showcasing how AI enhances network design, operation and maintenance, improving efficiency, reducing costs, and boosting performance.- The smart fault recovery solution which rapidly identifies the root cause of network failures, minimizing downtime and improving business continuity.- Network operation and maintenance enhancement solutions using Fujitsu's AI, trained with the knowledge of skilled operators.- The network resource optimization solution which optimizes resource management in complex Beyond 5G networks, dynamically allocating resources to meet fluctuating demands, ensuring stable network low power consumption/cost.2. AI zone - solving societal issues and transforming customer operations- Ocean digital twin technology to accurately replicate ocean conditions and support ecosystem conservation, carbon neutrality, and the inspection and maintenance of marine structures.- Fujitsu's AI agents developed as core technology for the Fujitsu Kozuchi AI service.- Fujitsu’s next-generation Arm-based processor FUJITSU-MONAKA (currently under development, targeted for release in 2027).- Demonstration of Fujitsu Data Intelligence PaaS case studies showing this platform uses data and AI to optimize supply chains, enhance resilience, and transform on-site operations, including system development and maintenance.Overview of MWC Barcelona 2025 and Fujitsu boothDate: Monday, March 3, 2025 to Thursday, March 6, 2025Venue: Fira Gran Via, Barcelona, SpainFujitsu booth: 2G60 (Hall 2)(1) FUJITSU-MONAKA :This is based on results obtained from a project subsidized by the New Energy and Industrial Technology Development Organization (NEDO).About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers in over 100 countries, our 124,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: Computing, Networks, AI, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.7 trillion yen (US$26 billion) for the fiscal year ended March 31, 2024 and remains the top digital services company in Japan by market share. Find out more: www.fujitsu.com.Press ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com.

- TOYOTA GAZOO Racing will introduce the evolved GR Corolla to Japan, with orders accepted from February 4 ahead of the March 3 launch.- The evolved GR Corolla leverages insights, gained by competing in motorsports events such as the Super Taikyu Series, for improved high-speed cornering, acceleration, and cooling performance.- It is also available with the newly developed 8-speed GAZOO Racing Direct Automatic Transmission (GR-DAT) featured in the evolved GR Yaris.- Based on feedback from professional race drivers, evaluation drivers, and Toyota Master Driver Morizo, development focused on an untamed energy that makes one want to keep on driving, whether at the limit or in everyday use.TOKYO, Feb 4, 2025 - (JCN Newswire via SeaPRwire.com) - TOYOTA GAZOO Racing (TGR) has started accepting orders for its evolved GR Corolla, a model that leverages insights gained by competing in motorsports. Orders will be accepted through Toyota dealerships across Japan from today, February 4, and actual launch is planned for March 3. This is the same model announced on August 2, 2024, in the USA, but with Japanese market specifications. The following news release provides detailed information on the features of this evolved GR Corolla.Evolved GR Corolla Makes World Premierehttps://toyotagazooracing.com/pressrelease/2024/0802-01/ for more information, visit https://global.toyota/en/newsroom/toyota/42165939.html. Copyright 2025 JCN Newswire via SeaPRwire.com.

- Order intake increased YoY in Energy Systems and Plants & Infrastructure Systems, with largest contributions from GTCC and Aero Engines in Energy Systems and Metals Machinery in Plants & Infrastructure Systems.- Revenue grew YoY in all segments, with largest gains in Aircraft & Missile Systems within Defense & Space.- Business profit achieved strong YoY growth in Energy Systems, Plants & Infrastructure Systems, and Aircraft, Defense & Space segments due to increased revenue, improved margins, positive impact from yen depreciation, as well as rebound from one-time charges incurred in previous fiscal year.- Increased full-year guidance for order intake, revenue, business profit, net income, EBITDA, and free cash flow to reflect stronger-than-expected performance in first three quarters.TOKYO, Feb 4, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Heavy Industries, Ltd. (MHI, TSE Code: 7011) announced that order intake increased 10.5% year-on-year to ¥4,968.9 billion in the three quarters ended December 31, 2024. Revenue rose 8.8% to ¥3,547.7 billion year-on-year, resulting in profit from business activities (business profit) of ¥264.7 billion, a 38.2% increase over the previous fiscal year, which represents a profit margin of 7.5%. Profit attributable to owners of parent (net income) was ¥172.1 billion, an increase of 24.7% year-on-year, with a profit margin of 4.9%. EBITDA was ¥382.0 billion, a 28.9% increase over Q1-3 FY2023, with an EBITDA margin of 10.8%, up 1.7 percentage points year-on-year.In Energy, order intake increased by ¥228.7 billion YoY, which reflected continued strong demand in Gas Turbine Combined Cycle (GTCC) and Aero Engines. Contracts for 16 large frame gas turbine units were concluded during Q1-3, the majority of which were from customers in the Americas. Revenue increased by ¥81.4 billion YoY; the largest gains were seen in GTCC, which worked to execute its sizeable backlog, and Aero Engines. Segment business profit increased by ¥67.9 billion YoY due to higher margins in GTCC, increased revenue and the rebound from one-time expenses in Aero Engines incurred in Q1-3 FY2023, together with stable performance in Nuclear Power.In P&I, order intake increased by ¥219.8 billion YoY due to favorable performance in Engineering, Metals Machinery, Machinery Systems, and Waste-to-Energy Systems. Revenue was mostly in line with Q1-3 FY2023 levels. Improved margins in Engineering and Metals Machinery, combined with increased revenue in Engineering and Machinery Systems helped to raise segment business profit by ¥12.6 billion YoY.In LT&D, revenue increased by ¥9.2 billion YoY as increased sales in Engines and Heating, Ventilation & Air Conditioning (HVAC) offset a decline in units sold in Logistics Systems. The decrease in units sold in Logistics System and additional costs from a supply chain disruption in Turbochargers resulted in a ¥16.5 billion YoY decrease in segment business profit.In ADS, order intake decreased by ¥22.0 billion YoY due to large order volume booked in Q1-3 FY2023 in Defense & Space. Revenue increased by ¥162.7 billion YoY, mainly in Defense & Space. Increased revenue and higher margins in Defense & Space outpaced the negative impact from a drop in 777 unit deliveries in Commercial Aviation, and segment business profit increased by ¥16.1 billion YoY. FY2024 Earnings ForecastMHI revised its guidance for the period ending March 31, 2025, increasing the forecasts for order intake, revenue, business profit, net income, EBITDA, and free cash flow over the previous announcement made November 5, 2024, to reflect stronger-than-anticipated performance during Q1-3. The full-year dividend target remains unchanged.(billion yen, except where otherwise stated)FY2024 Earnings ForecastFY2023ActualFY2024Forecast(Previous)FY2024Forecast(Revised)Revised vs.PreviousOrder Intake6,684.06,000.06,400.0+400.0Revenue4,657.14,900.05,000.0+100.0Profit from Business ActivitiesProfit Margin282.56.1%350.07.1%380.07.6%+30.0+0.5 ptsProfit Attributable to Owners of ParentProfit Margin222.04.8%230.04.7%240.04.8%+10.0+0.1 ptsROE11.1%10%10%-EBITDAEBITDA Margin432.69.3%500.010.2%530.010.6%+30.0+0.4 ptsFCF200.1-100.00.0+100.0Dividends20 yen (Note)22 yen22 yen-FY2023 Actual dividends (¥200/share) shown here adjusted retroactively to 1/10 of original value to reflect the 10-for-1 stock split effective April 1, 2024.(billion yen, except where otherwise stated)FY2024 EarningsForecast by SegmentOrder IntakeRevenueBusiness ProfitPreviousRevisedPreviousRevisedPreviousRevisedEnergy2,000.02,300.01,750.01,800.0180.0200.0P&I900.01,000.0800.0800.040.050.0LT&D1,350.01,350.01,350.01,350.060.060.0ADS1,700.01,700.0950.01,000.080.0100.0OC&E50.050.050.050.0-10.0-30.0Total6,000.06,400.04,900.05,000.0350.0380.0CFO Message"In the first three quarters of this fiscal year, many of our businesses continued the strong performance I shared with you during our last release, with all major financial indicators up year-on-year, especially business profit and net income," said Hisato Kozawa, MHI's Chief Financial Officer. He continued: "Regarding order intake, GTCC and Aero Engines in Energy, and Metals Machinery in P&I were star performers, with total orders exceeding the high bar set during the same period in FY2023. Revenue increased in Energy and ADS, which were executing on substantial order backlogs. Increased revenue, improved margins, the positive impact from yen depreciation, as well as a rebound from one-time charges incurred in the previous year drove the large profit growth seen during this period."We have increased our full-year guidance for most major indicators based on our strong performance during the first three quarters. Notably, we have updated our order intake target from ¥6 trillion to ¥6.4 trillion and business profit from ¥350 billion to ¥380 billion," Kozawa went on. "In the fourth quarter, we aim to outperform this updated guidance by actively mitigating risks while building on the successes of the first three quarters."Note regarding forward looking statements:Forecasts regarding future performance outlined in these materials are based on judgments made in accordance with information available at the time they were prepared. As such, these projections include risk and uncertainty. Investors are recommended not to depend solely on these projections when making investment decisions. Actual results may vary significantly from these projections due to a number of factors, including, but not limited to, economic trends affecting the Company's operating environment, fluctuations in the value of the Japanese yen to the U.S. dollar and other foreign currencies, and trends in Japan's stock markets. The results projected here should not be construed in any way as a guarantee by the Company.About MHI GroupMitsubishi Heavy Industries (MHI) Group is one of the world’s leading industrial groups, spanning energy, smart infrastructure, industrial machinery, aerospace and defense. MHI Group combines cutting-edge technology with deep experience to deliver innovative, integrated solutions that help to realize a carbon neutral world, improve the quality of life and ensure a safer world. For more information, please visit www.mhi.com or follow our insights and stories on spectra.mhi.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 4, 2025 - (JCN Newswire via SeaPRwire.com) - On Thursday, February 6, Mazda Motor Corporation (“Mazda”) is set to open MAZDA TRANS AOYAMA, an all-new concept showroom offering the Mazda brand experience in Minami-Aoyama – hub of cultural innovation – in the Minato ward of Tokyo."TRANS" in “MAZDA TRANS AOYAMA” connotes "change or transcendence," signifying Mazda’s wish that this space inspire people to take a positive outlook. Guided by the company’s purpose of “enrich life-in-motion for those we serve,” Mazda aims to deliver uplifting experiences to everyone with whom it engages in furtherance of this aspiration. MAZDA TRANS AOYAMA will serve as a space where not only current customers and enthusiasts, but also individuals who have yet to develop a connection with Mazda may tap into a range of information and experience the Mazda brand in the hope that they discover something new and feel inspired.The facility features a café supervised by ITUKI COFFEE, a specialty roaster that originated on Hiroshima’s Miyajima, providing visitors with a comfortable and relaxing respite. MAZDA TRANS AOYAMA will continually strive to enhance accessible and enjoyable content for all with limited-duration exhibits, experiential events, and workshops on diverse themes in addition to automobiles. Actual production automobiles, concept cars, and historic Mazda vehicles will be on permanent display, as will miniature cars chronicling Mazda Motor Corporation’s history. The MX-5 test drives will also allow visitors to envision a life with Mazda.In moving toward 2030, Mazda will aim to continue our research based on our human-centered philosophy, create more moving experiences for people to enjoy while driving in their daily life, and deliver more enjoyment to everyday life which will uplift and energize people.In moving toward 2030, Mazda will aim to continue our research based on our human-centered philosophy, create more moving experiences for people to enjoy while driving in their daily life, and deliver more enjoyment to everyday life which will uplift and energize people.MAZDA TRANS AOYAMAName: MAZDA TRANS AOYAMALocation: 5-6-19 Minami-Aoyama, Minato-ku, TokyoHours: 8:30 AM - 6:30 PM (Café (1F) open from 8:30 AM - 10:00 AM)Closed: MondaysInquiries: 03-6450-6691Website: https://www.mazda.co.jp/experience/mazda_trans_aoyama/Key Components*Café settingLimited-duration gallery exhibitions (ACTA+ works)Events (Scheduled events*: “Talk Session: My Personal Style – An Enjoyment of Roadsters and Color” on February 8 & 9, and "Creating Flower Arrangements Together" on February 15 & 16)Vehicle displays (production vehicles, concept cars, historic Mazda models, etc.)The MX-5 test drive experiences, and more*Please check the website for more information and specific dates of upcoming events. Copyright 2025 JCN Newswire via SeaPRwire.com.

KAWASAKI, Japan, Feb 4, 2025 - (JCN Newswire via SeaPRwire.com) - Fujitsu today announced the launch of a software analysis and visualization service. Available in Japan from February, this service will support enterprise and organizational modernization by investigating and analyzing software, visualizing black-box application structures and characteristics, and generating design documents using generative AI. This comprehensive approach enables a robust understanding of current systems and facilitates the creation of optimal modernization plans.The service comprises two components: software analysis and visualization, which visualizes the application structure and specifications of existing systems; and software design document reverse engineering, which generates design documents from software. Leveraging Fujitsu's expertise gained from analyzing the system assets of over 600 companies, this service provides comprehensive support, from gaining a robust understanding of company software to streamlining and optimizing software for migration to new systems, evaluating migration difficulty level during mainframe-to-open-environment migration, and even generating design documents using generative AI.Leveraging the core technology of Fujitsu's AI service, Fujitsu Kozuchi, the design document reverse engineering service generates user-friendly design documents from large datasets. This AI-powered service can significantly improve efficiency, with projections of a 50% improvement for retail customers compared to manual methods.Fujitsu is currently advancing the utilization of generative AI across a comprehensive range of phases within system integration (SI) projects, encompassing modernization initiatives and extending from requirements definition to operational maintenance. The strategic application of generative AI to tasks traditionally executed manually by engineers—including the creation of design documentation and source code throughout the design, development, and testing phases—is intended to yield significant increases in efficiency. The Fujitsu software analysis and visualization service, which enables the use of generative AI at the requirement definition stage of the SI process, represents one of the many ways that Fujitsu is accelerating SI transformation by leveraging generative AI to the maximum extent towards productivity and quality improvements.Overview of the Software Analysis and Visualization Service1. The software analysis and visualization service visualizes complex software to facilitate smooth system migrationsThis service supports a comprehensive understanding, streamlining, and optimization of software applications, as well as evaluating migration difficulty level. Through the automated creation of software maps that visualize application functional structures—representing the application as a building depicted on a map, it allows for a rapid and intuitive grasp of the current state of the software. Additionally, it categorizes all software by programming language, identifying unused items and similar source code. In evaluating migration difficulty level, it efficiently selects mainframe functions necessary for the application using a standardized process based on Fujitsu’s modernization experience. From this selection, it extracts functions that pose obstacles to migration from mainframe to open environments and evaluates the difficulty of porting.2. The software design document reverse engineering service leverages generative AI to support the creation of high-quality design documentsDeparting from conventional analysis methodologies that mechanically parse source code line-by-line based on predefined rules and verify against documented results to ascertain system structure, Fujitsu combines the Fujitsu Knowledge Graph Enhanced Retrieval Augmented Generation (RAG) for Software Engineering to achieve a substantial enhancement in the quality of both asset comprehension and design document generation.This technology leverages a large language model (LLM) to significantly enhance the accuracy and completeness of software analysis and design information generation. The process involves constructing an asset knowledge graph from existing design documentation and static analysis of the source code (obtained through either conventional tools or LLM-based analysis). A proprietary RAG function then facilitates the precise identification and extraction of relevant knowledge for design information generation. This targeted information, combined with the source code, is input into the LLM, resulting in an approximately 40% improvement in the quality of generated design information compared to source-code-only methods.Furthermore, to mitigate the risk of LLM hallucinations, this technology incorporates a mechanism to refine input information and detect instances of LLM forgetting. This results in approximately 95% prevention of forgetting and enables the generation of accurate design information, leading to anticipated improvements in the efficiency of human review processes.Future PlansTo further enhance productivity and bolster support for client modernization efforts, Fujitsu will widely expand the scope of generative AI application. Future developments will include interactive capabilities for verifying current application specifications and assessing the impact of source code changes. This commitment to innovation will significantly contribute to the successful realization of our clients' digital transformation (DX) objectives.About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers in over 100 countries, our 124,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: Computing, Networks, AI, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.7 trillion yen (US$26 billion) for the fiscal year ended March 31, 2024 and remains the top digital services company in Japan by market share. Find out more: www.fujitsu.com.Press ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 3, 2025 - (JCN Newswire via SeaPRwire.com) - National Center for Geriatrics and Gerontology and Eisai Co., Ltd. announced today that Eisai has created the “Guidance on Reducing the Risk of Cognitive Decline and Nutrition” (hereinafter “the guidance”) and the “Handbook for Developing Home Delivery Meals/Meal Kits that Contribute to Reducing the Risk of Cognitive Decline” (hereinafter “the handbook”) under the supervision of NCGG. These documents are being provided to food-related companies, including those offering home delivery meal/meal kit services.A healthy diet has been known to play an important role throughout life in growth, development, and disease prevention. In recent years, its potential benefit in the prevention of dementia and mild cognitive impairment (MCI) has also been reported. As the understanding of the importance of early detection and intervention for cognitive decline is increasing, an appropriate diet is considered to be a key element in reducing the risk of dementia.NCGG promotes initiatives both to publish research findings that contribute to maintaining cognitive function and improving public nutrition, and to implement these findings within society. Eisai aims to contribute to the solution of dementia-related challenges by leveraging its 40 years of research and development experience in the field of dementia and collaborating with various partners. Under the supervision of NCGG, Eisai reviewed 8,269 domestic and international studies regarding nutrition and diets that reduce the risk of cognitive decline, applying the results to the creation of guidance regarding the types of diets thatmay potentially reduce the risk of cognitive decline. Additionally, after an objective assessment of evidence associated with themaintenance and improvement of cognitive functions, Eisai created a handbook on developing home delivery meal/meal kit menus from the perspective of “preventing malnutrition and frailty that leads to cognitive decline,” “nutrients that reduce the riskof cognitive decline,” and “nutritional balance that reduces the risk of cognitive decline”. Eisai is providing this guidance and handbook upon request to food-related companies that have agreed to support dementia awareness activities. NCGG and Eisai are planning to expand collaborations with food-related companies, not limited to home delivery meals/meal kits businesses.This initiative also contributes to the realization of a dementia-inclusive society as indicated in the national “Basic Act on Dementia to Promote an Inclusive Society.” NCGG and Eisai aim to improve public nutrition through collaboration amongindustry, government, and academia, contributing to the extension of healthy life expectancy and the creation of a society where the elderly can continue to live with peace-of-mind within their communities.Regarding the “Guidance Reducing the Risk of Cognitive Decline and Nutrition” and the “Handbook for Developing Home Delivery Meals/Meal Kits that Contribute to Reducing the Risk of Cognitive Decline”Eisai reviewed 8,269 domestic and international research articles, including those by Director-General of Research Institute Dr. TakashiSakurai of NCGG, considering nutritional interventions recommended by the WHO. Under the supervision of NCGG, Eisai compiled the “Guidance on Reducing the Risk of Cognitive Decline and Nutrition” and the “Handbook for Developing Home Delivery Meals/Meal Kits that Contribute to Reducing the Risk of Cognitive Decline” to enable food-related companies to leverage academic insights in new business ventures.Overview of Guidance on Reducing the Risk of Cognitive Decline and NutritionWhen growing older, focus shifts from preventing overnutrition, which is associated with lifestyle diseases such as diabetes, to preventingundernutrition, which is associated with frailty. This is also the period where the risk of dementia onset increases. Elderly individuals withcognitive decline may have an increased risk of overnutrition due to changes in preferences and eating habits, while some may have an increased risk of undernutrition due to decreased physical function and activity levels, leading to reduced food intake. This makes elderly people with cognitive impairment more susceptible to nutritional imbalances compared to the general elderly population. This guidancereviews domestic and international research on nutrition and diets that reduce the risk of cognitive decline, aiming to delve into what dietmay potentially reduce this risk.Overview of the Handbook for Developing Home Delivery Meals/Meal Kits that Contribute to Reducing the Risk of Cognitive DeclineTypical home delivery meal/meal kit menus are formulated by referring to the Dietary Reference Intakes for Japanese (2020 edition, last updated January 21, 2020) and the Standard Tables of Food Composition in Japan (8th revised edition) Supplement 2023 (published in April 2023). This handbook is a reference material compiled for those involved in menu development, such as registered dietitians, to provide information on developing home delivery meal/meal kit menus that contribute to reducing the risk of cognitive decline while complying with these standards.Currently, the following companies have recognized the value of this initiative and are promoting development of their menus and services using this guideline and handbook. Eisai also looks forward to collaborating with more companies in the future.*Each company will develop and manufacture healthy bento boxes and meal kits based on the “Guidelines for Developing Home DeliveryMeals/Meal Kits that Contribute to Reducing the Risk of Cognitive Decline,” created by Eisai under the supervision of NCGG. The development and manufacturing will be conducted by these companies at their own discretion.About NCGGThe National Center for Geriatrics and Gerontology (NCGG) was established in 2004 as the sixth national center. It became an independent administrative institution in 2010 and a national research and development agency in 2015. To advance innovative medical care for geriatric syndromes such as dementia and frailty in Japan, the center conducts various basic, clinical, and epidemiological research on aging.About EisaiEisai’s Corporate Concept is “to give first thought to patients and people in the daily living domain, and to increase the benefits thathealth care provides.” Under this Concept (also known as our human health care (hhc) Concept), we aim to effectively achieve social good in the form of relieving anxiety over health and reducing health disparities. With a global network of R&D facilities, manufacturing sites, and marketing subsidiaries, we strive to create and deliver innovative products to target diseases with high unmet medical needs, with a particular focus in our strategic areas of “Neurology,” “Oncology” and “Global Health.”In addition, our continued commitment to the elimination of neglected tropical diseases (NTDs), which is a target (3.3) of the UnitedNations Sustainable Development Goals (SDGs), is demonstrated by our work on various activities together with global partners.For more information about Eisai, please visit http://www.eisai.com (for global headquarters: Eisai Co., Ltd.), and connect with us on X,LinkedIn and Facebook.MEDIA CONTACTS:National Center for Geriatrics and Gerontology Public Relations SectionTEL: +81(0)562-46-2311Eisai Co., Ltd.Public Relations Department TEL: +81 (0)3-3817-5120 Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 3, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Heavy Industries, Ltd. (MHI) has presented its "Best Innovation 2024" awards to 21 products, technologies and services that recognize efforts related to the development and practical application of solutions to help resolve social issues. These awards have been handed out annually since 2003, with the aim of encouraging innovation and raising awareness of the need to reduce environmental impact throughout the entire Group.Of this year's 21 award-winning recipients, here we introduce 13 innovations related to the Group's strategic growth areas that will contribute to realizing a sustainable society.Retrofitting Service for Existing Gas Turbine Power Plants to Enable Hydrogen Mixed CombustionMitsubishi Heavy Industries, Ltd., Energy SystemsMHI received an order for modification services to enable hydrogen mixing at an existing gas turbine power generation plant and successfully completed the modification. Specifically, this included installing additional plant equipment and control logic modifications to the gas turbine power generation facility at the Okinawa Electric Power Company's Yoshinoura Multi-Gas Turbine Power Plant that MHI installed in 2015, in order to control the flow of hydrogen while mixing it with fuel gas. The plant was converted to a commercial facility capable of hydrogen co-firing and successfully achieved hydrogen co-firing operations (on a scale of 30% by volume). This achievement will contribute to the expansion of the gas turbine business as a solution for achieving a decarbonized society.New Large-Capacity Centrifugal Chillers, known as the "JHT-Y/JHT-YI Series," Employing Refrigerants with an Extremely Low Environmental ImpactMitsubishi Heavy Industries Thermal Systems, Ltd. (MHI Thermal Systems), Chiller & Heat Pump Engineering DepartmentMHI Thermal Systems has developed the world's first centrifugal chiller to adopt a refrigerant for car air-conditioners (HFO-1234yf), which has a global warming potential (GWP) of less than 1, with an extremely low environmental impact, and can be reliably sourced. It is equipped with a highly efficient and compact compressor that is tailored to HFO-1234yf and has secured numerous orders from 2023 onwards. The new chiller is capable of replacing conventional units and features a 99.9% reduction in environmental impact (CO2 equivalent) in case of refrigerant leakage. MHI Thermal Systems plans to further expand the market for this product in the future, as it has the capacity to meet the performance requirements (2,500-3,000 tons of refrigeration) of large-scale data centers in North America and Southeast Asia, where rapid growth in demand for electricity is expected. The company received the Minister of the Environment Awards for Climate Action 2024.Successful Launch of the Second H3 Launch VehicleMitsubishi Heavy Industries, Ltd., Integrated Defense & Space SystemsAs Japan's new flagship rocket, the second H3 launch vehicle was successfully launched in February 2024, followed by successful launches of the third and fourth test flights in July and November, respectively.The H3 launch vehicle has been under development by the Japan Aerospace Exploration Agency (JAXA) since 2014, and although the launch of the first test flight failed in 2023, the cause of this failure was identified, leading to the successful launch of the second flight. While continuing to make incremental improvements to achieve the initial goal of a flexible and highly reliable, as well as low-cost launch vehicle, MHI will continue to consistently launch satellites and space vehicles at a frequency of six or more per year to contribute to the construction of social infrastructure in space such as weather, communications and security satellites, alongside promoting space utilization and exploration.Initiatives to Reduce Factory CO2 Emissions by Replacing Existing Factory Boilers with "Q-ton Circulation, MSV" Air-Source Heat PumpsMitsubishi Heavy Industries Thermal Systems, Ltd., Production DepartmentMHI Thermal Systems implemented efforts to reduce CO2 emissions at an existing plant by converting its heat source from a steam boiler to a heat pump manufactured by our company. Specifically, by measuring the amount of heat required and changing the processing chemicals, at initiative target plant, MHI Thermal Systems was able to completely eliminate the need for boilers in the production process after seven years since the start of this initiative and reduce CO2 emissions by approximately 40%. Since our heat pumps are air-sourced, they can replace steam boilers simply by installing a power supply and hot water piping, and so MHI Thermal Systems are currently in the process of expanding the use of these heat pumps to other plants with parts washing and heat treatment facilities that operate at temperatures of 80℃ or lower. This initiative has received external recognition, including the Energy Conservation Center Chairman's Award in the Energy Conservation Case Study Category of the 2023 Energy Conservation Grand Prize, and MHI Thermal Systems expects to receive increased orders in the future.The World's First Ammonia and Fertilizer Production Plant Capable of Capturing and Effectively Utilizing CO2 in Exhaust Gas with the New "KS-21™" Amine Solvent Solution.Mitsubishi Heavy Industries, Ltd., GX SolutionsThis solution/product is capable of capturing CO2 from the exhaust gas emitted by the primary reforming of natural gas at an ammonia/fertilizer plant and utilizing the captured CO2 in the production of fertilizer. The plant, which MHI supplied to Bangladesh, began commercial operation in March 2024 as the largest ammonia/fertilizer production plant in the country. Using the new KS-21™ amine solvent, the company was able to capture 240 tons/day of CO2 from combustion exhaust gases that had previously been released into the air, thereby increasing their fertilizer production by 10%. This achievement has been reported both in Japan and overseas and is expected to contribute significantly to achieving a carbon neutral society and alleviating food shortages in Bangladesh.Contributing to Recycling-based Society by Introducing High-Efficiency Biomass Power Plants, as Large-Capacity Renewable Energy Power SourceMitsubishi Heavy Industries, Ltd., Energy SystemsThe projects demonstrate the potential for CO2 emissions reduction by introducing high-efficiency biomass power plants which can serve as large-capacity power source that is unaffected by weather fluctuations despite utilizing renewable energy. The plants which are MHI's first products to apply circulating fluidized bed boilers with reheat system and geared type steam turbines, will reduce CO2 emissions by approximately 300,000 tons per year per unit compared to 50 MW-class coal power plants. Moreover, by adopting standardized designs and other measures, MHI has established organizational systems that enable it to propose products that meet multiple customers' needs simultaneously and has received orders for the projects of six plants (total generating capacity: approx. 320MW), four of which have already started commercial operation as planned. The other two are expected to commence that by April 2025, and once all six plants are operational, we predict reduction of CO2emissions for at least 2 million tons annually.Securing Aircraft Maintenance Technicians and Creating Local Jobs Through the Aircraft Mechanic Training Program (MHIRJ Academy)MHI RJ Aviation GroupThe MHIRJ Academy is a state supported eight-week program, creating jobs in the community and inviting personnel who did not have exposure to aviation industry. Eliminated barriers to entry for the applicants to pursue a career in aviation while increasing the much-needed aircraft maintenance workforce at the service center. The program is conducted at the MHIRJ maintenance hangar in Bridgeport, West Virginia, US, where experienced MHIRJ mechanics serve as instructors and provide basic aircraft maintenance training. The program is FAA Approved Training that leverages classroom and practical experience to teach the required skills to do sheet-metal repairs. After completion of the Academy, employee will be able to obtain Repairman Certificate. Sixty-four of the 75 participants in this program have already graduated and are now working at MHIRJ as repairman contributing to securing critical resources and MHIRJ is now a participant in generating the next generation of aircraft technicians and contributing to easing the shortage of maintenance technicians in the US that is projected to last over the next decade. MHIRJ Academy plans to produce a total of 100 graduates by May 2025.Further Advances in Automatic Gas Turbine Combustion Vibration Control Technology (A-CPFM) (Note) by Leveraging AIMitsubishi Heavy Industries, Ltd., Research & Innovation CenterBy incorporating machine learning into the conventional automatic combustion vibration adjustment technology for gas turbines (A-CPFM), MHI has developed a service technology that enables automatic adjustments that take into account the reliability of the predicted results. The system learns combustion vibration characteristics in real time and automatically searches for and adjusts the stable combustion zone based on the uncertainty of the predicted results, enabling the operation of gas turbines with reduced risk. At the same time, MHI has developed the technology to automatically collect operating data for machine learning, which can also take into account changes in operating characteristics over the long-term as the system deteriorates. This new technology has been applied to a gas turbine combined cycle (GTCC) plant at the Jackson Power Plant in the US and successfully achieved zero trips due to combustion vibration. It can also be used to adjust the combustion vibration of new models of combustors, which had previously been difficult to manage, and is expected to gain further market penetration in the future.A-CPFM: Advanced Combustion Pressure Fluctuation Monitoring SystemThe Sole Composite Precision Manufacturing Technology in the World Capable of Producing Key Components for Experimental Fusion Reactor, the ITERMitsubishi Heavy Industries, Ltd., Nuclear Energy SystemsThe ITER is an experimental fusion reactor for a highly extensive international cooperative project. The divertor is one of the key components in the ITER tokamak, and especially, the fabrication of the outer vertical target (OVT) requires a complex structure consisting of special materials and high fabrication precision in order to withstand the extreme environment, including high heat flux (up to 20 MW/m²). MHI has succeeded in manufacturing the world's first OVT prototype that meets this high level of technical requirements using the new manufacturing technologies MHI developed, including dissimilar joining technology for brazing tungsten blocks and Cu-alloy tubes (tolerance of ±0.1 mm between blocks), non-destructive inspection technology, and welding and machining technology for materials that prove difficult to weld (such as XM-19 stainless steel), in addition to our proprietary manufacturing technologies accumulated over a long period of time, such as machining with the "Super Miller", a large scale complex machine tool, and "electron beam welding" which does not require welding materials. As a result, these manufacturing technologies are the only ones certified by the National Institutes for Quantum Science and Technology (QST), the Japan domestic agency for ITER, and MHI has received orders for 18 out of the 58 OVTs for ITER, all which are so far ordered by QST. Further contributions to the business are anticipated as orders are expected to be placed in the next fiscal year and beyond.Composite Risk Management Technology to Reduce the Risk of Unplanned Outages and Stabilize the Operation of Overseas Waste-to-Energy (WTE) Facilities -- Utilization of the Integrated WTE Plant Operation System "MaiDAS®," etc. Mitsubishi Heavy Industries Environmental & Chemical Engineering Co., Ltd. (MHIEC), Overseas Business Operation DivisionOperation of Large-scale overseas WTE facilities are sometimes subject to high risk due to external disruptions, such as the incineration of waste with unstable properties and human error by inexperienced operators, so reducing unplanned shutdowns in these facilities is an urgent issue. In response, MHIEC has introduced the integrated WTE plant operation system "MaiDAS®" to support plant operation through monitoring and automatic operation, and in parallel developed a tool to predict when a furnace shutdown for inspection is required based on operational data and reflected the predictions in the annual operation plan and daily operating conditions, thereby ensuring stable plant operation. Furthermore, MHIEC has improved the business feasibility by developing technologies to reduce the consumption amount of chemicals, reducing interest payments on loans, and other creative measures for facility operation. Using this remarkable achievement as a steppingstone, MHIEC will continue to contribute to mitigation of global environmental harm and the protection of the global environment through WTE facilities equipped with "MaiDAS®" in the future.Next-Generation Cold Rolling Technology to Produce Magnetic Steel for Future Electric VehiclesPrimetals Technologies, Global Business Unit DownstreamThe world's first 2-stand Hyper UC-MILL® is an advanced reversing cold rolling mill equipped with a steel sheet induction heating system, a novel rolling lubricant supply technology MQL®, and a steel sheet temperature control system. This innovative system utilizes a new generation of 6-high cold mill featuring a small work diameter and enables the rolling of strips as thin as 0.2 mm ideal for use in electric vehicle motors. This technology allows the stable production of very brittle high-silicon electrical steel sheets. The first commercial unit has already gone into operations at thyssenkrupp Steel, a German steel manufacturer located in Bochum. The mill was successfully started up in 2023/2024 and manufactures the entire product mix including thin-gauge, high-grade, non-grain oriented electrical steel, for example used for electric vehicles, and advanced high-strength steels (AHSS) addressing the needs of the automotive industry. Thanks to the increasing electrification and popularity of electric vehicles, demand for electrical steel sheets is on the rise. Accordingly, the business is expected to grow.Development of Ultra High-Speed Blowdown Combustion Test Equipment to Streamline Development for Hydrogen-Fired Gas Turbine CombustorsMitsubishi Heavy Industries, Ltd., Research & Innovation CenterMHI has developed an ultra-high-speed blowdown combustion test equipment that dramatically improves the efficiency of actual pressure combustion test for large gas turbines. This has enabled successful operation of the complex, high-speed, and challenging system on the first run, reducing the test time from 6 hours to 3 minutes (1/120th) and the test fuel cost down to 1/24th of the original actual pressure combustion test. The success was attributed to the development and application of technology that, in addition to the design of a large-scale structure, combines an emulator of control logic with dynamic simulation to predict temperature and pressure stabilization to simulate the timing of valves opening and closing and the adequacy of high-speed operational settings. This technology is expected to become a core component of future competitiveness as it can be applied to the development of gas turbine combustors capable of handling a wide range of hydrogen concentrations from hydrogen co-firing to hydrogen firing, as well as to the control design of any large-scale machinery group or plant.Awarded the "DX Grand Prix" for the First Time as a Company Leading the Digital AgeMitsubishi Heavy Industries, Ltd., Digital Innovation HeadquartersIn the "Digital Transformation (DX) Stocks 2024" hosted by Japan's Ministry of Economy, Trade and Industry, the Tokyo Stock Exchange, and the Information-technology Promotion Agency, Japan (IPA), MHI was awarded the Grand Prix and selected as a leading company in digital transformation. The development and social implementation of the solution concept "ΣSynX (Sigma Syncs)" for automating and intelligentizing our entire Group's products, which we have been working on, have progressed in various areas. Our specific DX initiatives aimed at achieving carbon neutrality have been appreciated by stakeholders.About MHI GroupMitsubishi Heavy Industries (MHI) Group is one of the world’s leading industrial groups, spanning energy, smart infrastructure, industrial machinery, aerospace and defense. MHI Group combines cutting-edge technology with deep experience to deliver innovative, integrated solutions that help to realize a carbon neutral world, improve the quality of life and ensure a safer world. For more information, please visit www.mhi.com or follow our insights and stories on spectra.mhi.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

Kawasaki and Nagoya, Japan, Feb 3, 2025 - (JCN Newswire via SeaPRwire.com) - Fujitsu Limited and Tokai National Higher Education and Research System, which operates Gifu University and Nagoya University, today announced the commencement of joint research with the Japan Aerospace Exploration Agency (JAXA) on the “Development of explainable AI-based prediction model for solar energetic particle events for Moon and Martian exploration.” The joint research began on February 1, 2025, and will run until March 31, 2026.Under a comprehensive agreement signed on February 24, 2023, Fujitsu and the Institute for Space-Earth Environmental Research (ISEE), Nagoya University have been collaborating on advancing space weather forecasting. This research has been selected for the Moon to Mars Innovation (1) program, an initiative of JAXA's Space Exploration Innovation Hub.This research utilizes Fujitsu's explainable AI technology, Fujitsu Kozuchi XAI, simulation data from ISEE and lunar data from JAXA to predict solar energetic particle events on the lunar surface. Solar energetic particles (SEPs) are a type of cosmic radiation that forms around solar flares and similar events, and propagates through space. Direct exposure to SEPs on the lunar surface or in outer space around the Earth may be lethal, so it is necessary to be able to predict when they may occur.In anticipation of the Artemis Project (2), an international lunar exploration program, the research partners aim to accelerate observation and prediction research on the lunar surface by refilling data analysis specifications for the Space Radiation Dosimeter (3), which JAXA is developing.Fujitsu and Tokai National Higher Education and Research System are committed to developing predictive technology for solar energetic particle events to ensure the safety of all space activities, including lunar exploration. This research will be further developed and implemented in collaboration with JAXA and relevant stakeholders, with anticipated applications in areas such as health management, space transportation and resource planning, and emergency radiation warnings.(1) Moon to Mars Innovation :A joint research system focusing on technical issues that directly respond to the needs of international space exploration. It is focused on the application of innovative terrestrial technologies and aims for the gradual realization of technological and infrastructural advancements that will revolutionize the architecture of international space exploration, paving the way for sustained lunar and Martian exploration.(2) Artemis Project :Plan for the moon exploration led by NASA and the subsequent manned landing on Mars. A manned test flight and the first manned moon landing since the Apollo program are scheduled after 2025.(3) Space Radiation Dosimeter :Device, which is scheduled to be installed on the Gateway, a manned lunar orbiting base that JAXA is participating in the development of.About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers in over 100 countries, our 124,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: Computing, Networks, AI, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.7 trillion yen (US$26 billion) for the fiscal year ended March 31, 2024 and remains the top digital services company in Japan by market share. Find out more: www.fujitsu.com.Press ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Feb 1, 2025 - (JCN Newswire via SeaPRwire.com) - Anime Tokyo Station (2-25-5 Minami-Ikebukuro, Toshima-ku, Tokyo) is an anime exhibition site focused on Japanese anime content, which has developed a devout fan base even outside Japan. Since opening, it has welcomed over 130,000 visitors from both Japan and overseas.Now, with the concept of rediscovering anime's appeal, it has created ANIME☆OTODAMA, the first in a series of games aimed at further sharing the appeal of Japanese anime and of Anime Tokyo Station. ANIME☆OTODAMA will be released at 3:00 p.m. on January 31, 2025, on Roblox, one of the world's leading immersive platforms.Come see Anime Tokyo Station in the metaverse and experience the diverse appeal of anime through gaming.The Anime Tokyo Station website has also created a ANIME TOKYO STATION ON ROBLOX special page! This page will be used to share information such as explanations of how to play and version release notes.ANIME TOKYO STATION ON ROBLOX special page: https://animetokyo.jp/en/roblox/TitleANIME TOKYO STATIONStage 1ANIME☆OTODAMA, a treasure-hunting game where you can rediscover the appeal of animeRelease dateJanuary 31, 2025 3:00 p.m.PlatformRoblox (iOS, Android, PC, PlayStation5, PlayStation4, Xbox One)GenreParty gameURLhttps://www.roblox.com/games/85319291338189/*You will need to download the Roblox app and register an account to access the game. ANIME TOKYO STATION ON ROBLOXAnime Tokyo Station has created a game that embodies the appeal of anime and will directly reach young people worldwide using Roblox. Through the sound effects, words, voice acting, and theme world design of the intuitive and easy-to-understand medium of anime, the game will share anime's appeal and foster direct communication between users. It aims to promote visits to the real-world Anime Tokyo Station by people across Japan and overseas."Platform," a Space where You Can Immersively Experience the Anime Tokyo StationEnjoy the appeal of the Anime Tokyo Station exhibition site in virtual space! The constantly update "Information Board" and the "Message Board," which fans can use to communicate with each other, have also been set up within Roblox's metaverse space. Write your own messages to others and share your love of anime! Approach one of the three trains on the platform to warp into the rich world of anime! There are lots of other things to enjoy, as well.ANIME☆OTODAMA, a Treasure-Hunting Game where You Rediscover the Appeal of Anime, Together with Distinctive Anime Sound Effects, Words, and Voice ActingThe world of ANIME☆OTODAMA is set in Tokyo's Asakusa area in 1917, the year when Japan released its first domestically produced anime! But...it's a world without sound?!Set out on an adventure to restore sound to the world, along with a manager avatar you meet near a fountain. The treasure hunt begins near the entrance to a cave, from where you set out to collect OTODAMA, which have the mystical power of Japanese words and sounds.Work with others to solve puzzles and bring sound and words back to this themed world. A new experience awaits!Stage 2 Version Upgrade and Release Campaign InformationThe project website will provide information about a promotional present campaign to be held within Roblox starting in February and about an upcoming upgrade to the game.Special website page: https://animetokyo.jp/en/roblox/What is Roblox?As of the end of December 2024, Roblox is the world's fastest-growing immersive social platform. It is available in 190 countries and 16 languages, and has roughly 90 million daily active users (as of November 2024). It is particularly popular with young people. Users spend an average of 2.4 hours a day in Roblox, and total play time is on the rise, increasing 24% year-on-year. In Roblox, users can enjoy both gaming and social features. It is particularly popular in the U.S. and Canada, and in Asia, is rapidly growing in Japan and India. Its Japanese user base has grown 56% year-on-year. Roblox is also starting to be used for education, business, and community revitalization, and expectations are high for its continued future expansion.Overview of the Facility- Name: Anime Tokyo Station (abbreviation: Anime Tokyo)- Location: Tokyu Building East Building No. 5, 1-2F above ground, B1F below ground (2-25-5, Minami-Ikebukuro, Toshima Ward, Tokyo) *4-minute walk from Ikebukuro Station- Hours: 11:00 a.m. - 7:00 p.m. (last admission by 6:45 p.m.)- Closed: Mondays*If Monday is a holiday, the museum will be open on Monday and closed the following day. Also closed on New Year holidays, temporary closures, etc.*Please check the official website before visiting.- Admission: Free- Official website: https://animetokyo.jp/en/Inquiries regarding this press releasePublic Relations Office of "Anime Tokyo Station" (Kyodo PR)Contact person: Miri YasudaE-mail: animetokyo-pr@kyodo-pr.co.jp Press release: https://www.acnnewswire.com/docs/files/2025131_EN.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Jan 31, 2025 - (JCN Newswire via SeaPRwire.com) - TANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd. (Head Office: Chuo-ku, Tokyo; Representative Director & CEO: Koichiro Tanaka), a company engaged in the industrial precious metals business of TANAKA, announces the launch of its Visi Fine® series, a group of highly radiopaque precious metal materials, including platinum (Pt) alloy wire. The brand name Visi Fine® is a coined term combining “Visi” (visible) and “Fine” (fine and refined materials). The concept is to provide substances with excellent X-ray impermeability, crafted into highly reliable materials for medical device components using advanced processing technology.In recent years, the trend in medical settings has been toward minimally invasive and non-invasive surgeries and treatments that reduce the burden on patients and minimize wound size. Catheterization devices and implantable medical devices used in these surgeries and treatments (hereafter referred to as “medical devices”) must enable precise targeting of affected areas and exhibit low reactivity with bodily tissues. Additionally, visibility under X-ray imaging is an important factor in accurately determining the position of a medical device within the body. Precious metals such as gold and platinum, with their relatively high specific gravity, excellent radiopacity, and strong resistance to oxidation and corrosion, are widely used as materials for components of medical devices.Materials used for medical device components must be highly reliable and require various processing techniques and material customization tailored to the specific components to which they are applied. TANAKA offers the Visi Fine® series, a group of highly reliable materials that leverage the unique characteristics of precious metals through the company’s extensive expertise in materials development and proprietary technologies, including multiple melting technologies, ultra-fine wire processing, and laser cutting, developed over many years.TANAKA will showcase the Visi Fine® series for the first time at “MD&M West 2025,” a medical device trade show to be held in Anaheim, California, USA, from February 4 to February 6, 2025.As a leading company in industrial precious metal products, TANAKA is committed to contributing to advancements in medical and healthcare industry technologies.Precious Metal Fine WireMD&M West 2025 Outline- Title: MD&M West 2025- Dates: February 4 (Tue.) – February 6 (Thu.), 2025, 10:00–17:00 (until 16:00 on February 6)* Local time in Anaheim, USA- Venue: Anaheim Convention Center (Anaheim, USA)- Official Site: https://www.mdmwest.com- Exhibitor: TANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd.- Booth Number: 2185- Main Exhibited Products: Pt alloy wire, rings, electrode tip components, and laser-cut parts, and more.About TANAKASince its foundation in 1885, TANAKA has built a portfolio of products to support a diversified range of business uses focused on precious metals. TANAKA is a leader in Japan regarding the volume of precious metals it handles. Over many years, TANAKA has manufactured and sold precious metal products for industry and provided precious metals in such forms as jewelry and assets. As precious metals specialists, all Group companies in Japan and worldwide collaborate on manufacturing, sales, and technology development to offer a full range of products and services. With 5,355 employees, the group’s consolidated net sales for the fiscal year ending December 2023, was 611.1 billion yen.Official Website: TANAKA PRECIOUS METAL TECHNOLOGIEShttps://tanaka-preciousmetals.comProduct inquiriesTANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd.https://tanaka-preciousmetals.com/en/inquiries-on-industrial-products/Press inquiriesTANAKA PRECIOUS METAL GROUP Co., Ltd.https://tanaka-preciousmetals.com/en/inquiries-for-media/PDF: https://www.acnnewswire.com/docs/files/20250131.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

Mazda Motor Corporation's production and sales results for December 2024 and for January through December 2024 are summarized below.I. Production1. Domestic Production(1) December 2024Mazda's domestic production volume in December 2024 decreased 6.5% year on year due to decreased production of passenger vehicles.[Domestic production of key models in December 2024]CX-5:24,983 units(down 24.5% year on year)MAZDA3:8,944 units(up 16.4%)CX-90:5,838 units(up 82.4%)(2) January through December 2024Mazda's domestic production volume in the period from January through December 2024 decreased 10.7% year on year due to decreased production of passenger vehicles.[Domestic production of key models in the period from January through December 2024]CX-5:297,343 units(down 18.8% year on year)MAZDA3:104,682 units(up 2.9%)CX-30:86,461 units(down 2.1%)2. Overseas Production(1) December 2024Mazda's overseas production volume in December 2024 decreased 20.9% year on year due to decreased production of passenger vehicles.[Overseas production of key models in December 2024]CX-30:8,980 units(down 15.5% year on year)CX-50:8,138 units(up 24.6%)CX-5:4,400 units(up 11.5%)(2) January through December 2024Mazda's overseas production volume in the period from January through December 2024 increased 9.0% year on year due to increased production of passenger vehicles.[Overseas production of key models in the period from January through December 2024]CX-30:140,359 units(down 0.9% year on year)CX-50:113,186 units(up 56.5%)MAZDA3:69,393 units(down 25.8%)II. Domestic Sales(1) December 2024Mazda's domestic sales volume in December 2024 increased 1.3% year on year due to increased sales of passenger vehicles.Mazda's registered vehicle market share was 3.6% (down 0.2 points year on year), with a 2.5% share of the micro-mini segment (up 1.1 points) and a 3.3% total market share (up 0.4 points).[Domestic sales of key models in December 2024]MAZDA2:1,778 units(up 12.4% year on year)CX-5:1,396 units(down 21.1%)CX-80:1,201 units (2) January through December 2024Mazda's domestic sales volume in the period from January through December 2024 decreased 20.2% year on year due to decreased sales of passenger and commercial vehicles.Mazda's registered vehicle market share was 3.6% (down 1.1 points year on year), with a 2.4% share of the micro-mini segment (up 0.4 points) and a 3.2% total market share (down 0.5 points).[Domestic sales of key models in the period from January through December 2024]MAZDA2:21,656 units(up 4.7% year on year)CX-5:19,421 units(down 24.4%)CX-30:13,711 units(down 23.9%)III. Exports(1) December 2024Mazda's export volume in December 2024 decreased 11.0% year on year due to decreased shipments to North America and Europe.[Exports of key models in December 2024]CX-5:23,704 units(down 36.1% year on year)MAZDA3:8,362 units(up 11.6%)CX-90:6,551 units(up 56.6%)(2) January through December 2024Mazda's export volume in the period from January through December 2024 decreased 8.3% year on year due to decreased shipments to Europe, North America, and Oceania.[Exports of key models in the period from January through December 2024]CX-5:279,812 units(down 18.3% year on year)MAZDA3:93,175 units(up 5.6%)CX-90:78,982 units(up 37.5%)IV. Global Sales(1) December 2024Mazda's global sales volume in December 2024 increased 2.4% year on year due to increased sales in Europe, the U.S., and other regions.[Global sales of key models in December 2024]CX-5:28,317 units(down 24.6% year on year)CX-30:20,630 units(up 33.3%)MAZDA3:14,219 units(down 11.3%)(2) January through December 2024Mazda's global sales volume in the period from January through December 2024 increased 2.6% year on year due to increased sales in the U.S. and other regions.[Global sales of key models in the period from January through December 2024]CX-5:345,209 units(down 2.7% year on year)CX-30:234,295 units(up 16.7%)MAZDA3:173,719 units(down 2.8%)(1) Overseas production figures indicate Mazda-brand units coming off the production line (excluding CKD units).(2) Global production figures are the sum total of domestic and overseas production volumes.(3) All information in this press release is as of the release date. Any update after that is reflected.For more information, visit https://tinyurl.com/3tcv5taj Copyright 2025 JCN Newswire via SeaPRwire.com.